HSR AG, Balzers - Vacuum technology, cryogenics, angle valves, diffusion pumps > Products > CryogenicPumps > Cryoceniccontroller
 

Cryogenic control unit

Cryogenic control unit HCC 100

The tabletop unit for simple cryogenic pumps or cryostats

The HCC 100 includes complete steerage for simple cryogenic pumps or cryostats. Four different, fully-automatic regeneration cycles cover practically every application. Easiness of use due to touch-screen leaves no wishes unfulfilled. The HCC 100 can be used as tabletop unit or, by means of a special fastener, can be directly fitted to a DN40-flange on the cryogenic pump itself.

 

Features (extract)

  • simple usage via touch-screen
  • password secure operational area
  • fully automatic or manual operation
  • various temperature sensors can be configured
  • pre-vacuum and high vacuum measuring tubes from various manufacturers can be configured
  • complete observation and control of the pump and regeneration sequences
  • menu driven parameterisation and hardware settings
  • outputs for regulating and monitoring of  pre-vacuum valve, purge gas valve, accessories for quick regeneration, compressor and mechanic pre-pump
  • all dial indicators for vacuum pressure, temperatures, etc can be monitored via touch-screen
  • 2 analogue outputs, 0-10V, configurable for 2 output signals
  • 2 regulation channels for closed-loop control (e.g. heating 1st and 2nd level with cryostats)
  • remote control and -surveillance via RS 232/USB, Profibus as an option or digital inputs/outputs
Controller HCC 100 front
Controller HCC 100 back
  

Cryogenic control unit HCC 120 and HCC 120-2

Built as the HCC 100, but as an insert in a 19" rack

The HCC 120 has the same functionality and software as the HCC 100, but is built into a 19” standard rack to enable simple integration into an existing machine concept.

 

Each 19” rack can be fitted with up to two HCC 120 units (= HCC 120-2), which can be arranged in master/slave configuration and controlled via a RS 232 interface.

 

Up to 16 units can be steered and controlled using the RS 232 interface.

Controller HCC 120 front
Controller HCC 120 back
Controller HCC 120-2 front
Controller HCC 120-2 back

Cryogenic control unit HCC 130 and HCC 130-2

 

Pump Set Controller HCC 130 for automatic control of cryo pumps with up to 3 cold heads, including automatic regeneration sequence.

Each 19” rack can be fitted with up to two HCC 130 units (= HCC 130-2), which can be arranged in master/slave configuration and controlled via a RS 232 interface.

Up to 16 units can be steered and controlled using the RS 232 interface.

 

Features (extract)

  • Mounted in 19“ standard rack
  • Touch-Screen operated
  • Connections for two temperature sensors for display of temperature for stage 1 and stage 2 of cold head
  • Special HSR or diode temperatur sensors are configurable
  • Vacuum measurement gauges of various makes and types can be used
  • Complete surveillance and control of pump sequence
  • Complete surveillance and control of up to 4 different regeneration sequences
  • Menu guided parameterization
  • Outputs for control and surveillance of pre vacuum valve, purge gas valve, accessories for fast regeneration, compressor, and pre vacuum pump sets
  • All displays for vacuum pressure, temperatures, switching points and actual status are recallable on Touch.Screen
  • 2 Analog Outputs, 0 – 10V, configurable for

- 2 chooseable output signals to a XY chart recorder
- 2 control channels for closed loop control (for example heaters on 1. and 2. stage for a cryostate)
- any combination of them

  • Remote control and monitoring via digital inputs and outputs or RS 232 /USB, Profibus as an option

Cryogenic control unit HCC 150

Pump Set Controller HCC 150 for automatic control of cryo pumps with up to 5 cold heads, including automatic regeneration sequence.

The HCC 150 has the same functionality and software as the HCC 130

Cryogenic control unit HCC 190

 

Pump Set Controller HCC 190 for automatic control of cryo pumps with up to 3 cold heads, including automatic regeneration sequence, including integrated temperature control loop

 

Features (extract)

  • Mounted in 19“ standard rack
  • Touch-Screen operated
  • Connections for two temperature sensors for display of temperature for stage 1 and stage 2 of cold head
  • Special HSR or diode temperatur sensors are configurable
  • Vacuum measurement gauges of various makes and types can be used
  • Complete surveillance and control of pump sequence
  • Complete surveillance and control of up to 4 different regeneration sequences
  • Menu guided parameterization
  • Outputs for control and surveillance of pre vacuum valve, purge gas valve, accessories for fast regeneration, compressor, and pre vacuum pump sets
  • All displays for vacuum pressure, temperatures, switching points and actual status are recallable on Touch.Screen
  • 2 Analog Outputs, 0 – 10V, configurable for

- 1 chooseable output signals to a XY chart recorder
- 1 control channels for closed loop control (for example heaters on 1. and 2. stage for a cryostate)
- any combination of them

  • Remote control and monitoring via digital inputs and outputs or RS 232/USB, Profibus as an option

 


for further information click here


 

HSR AG
Föhrenweg 16
9496 Balzers
Phone +423 388 09 90
Fax +423 388 09 99
info@hsr.li